Cartoni Lambda Head 50 (3 axis)

The LAMBDA is the “NODAL SWING HEAD” ideally suited for digital Cinema cameras and 35mm film cameras fully equipped with long lenses, matte box and extra large film magazines. Providing a high level of operational flexibility, this Fluid Head can be easily fitted to a wider angle of supports including tripods, dollies, cranes and camera cars. The mounting can be inverted in under-slung position for low line positioning and allow the camera to be moved all the way to the ground and provide for accurate images which normally cannot be obtained with other traditional supports. The balance system is designed so that the camera may swing on its center of gravity and ROTATE 360° on its vertical axis. No springs or similar counter reaction elements are required to set the head in a fixed tilt position and fluid pan and tilt movements have the same identical feel. The lens focal distance can be kept constant by presetting the fore and aft horizontal sliding plate. The LAMBDA employs the patented CARTONI fluid drag control system on both pan and tilt modes. In order to obtain the 3RD AXIS rotation, the LAMBDA features the 3rd Axis accessory comprising an additional fluid drag system with 7 steps +“0”. A variety of accessories as the orienting extendable pan bar, the round steering wheel, the short pan handle, the 150 mm bowl base, the counterweights and rods for nodal setting complete the equipment.


Rental Rates

: $495 + HST
: $1485 + HST
Minimum Payload Capacity0 kg
Maximum Payload Capacity40 kg / 88 lbs
Weight15.5 kg / 34.2 lbs
Bowl DiameterPlate
TypeNodal
Fluid Drag7 steps + 0
Counterbalance0
Pan Range360°
Tilt Range360°
Temperature Range-40°/+60°

Click here for more information.

'