DJI Ronin 2

The versatile Ronin 2 gimbal from DJI is suitable for use handheld, or mounted in a variety of ways, including to a drone, Steadicam, vehicle mount, and more. An update from the original Ronin, this motorized stabilization system is suitable for a range of camera and lens configurations, boasting a payload capacity of 30 pounds. This means it can be used for everything from DSLRs up to cinema cameras such as the Arri Alexa Mini and Sony FS7.

Noteworthy Attributes:

  • For DSLRs / Cinema Cameras 
  • 30-Pound Payload Capacity 
  • Enhanced SmoothTrack Algorithm and GPS 
  • Upright, Underslung, and Briefcase Modes 
  • Easy Underslung/Upright Transitions 
  • 2-Axis Mode for Use with Steadicam 
  • Retractable Feet/Self-Supporting Design 
  • Camera Control for Select Cameras 
  • 2.4 / 5.8 GHz Switchable Remote 
  • Up to 0.6-Mile Control Range

Rental Rates

: $350 + HST
Built-in FunctionsOperation Modes
• Underslund Mode
• Upright Mode
• Briefcase Mode
• Handheld, Car Mount, Aerial & Tripod Mode

Axis Modes
• 3-axis
• Pan-Lock

Built-in, Independent IMU Module
• DJI Advanced 32-Bit ARM Processor
• DJI Specialized Gimbal Drive Motors with Encoders
• Dual Battery System
• Bluetooth Module
• D-Bus Receiver Supported
• 2.4 GHz/5.8 GHz Receiver
• Temperature Sensors
• Built-in Touch Panel
• Built-in GPS
• USB Type-C Connection
• Power and Video Signal through Slip Ring
Working CurrentStatic current: 300 mA (@22.8 V)
Dynamic current: 500 mA (@22.8 V)
Locked motor current: Max 15 A (@22.8 V)
Run Time8 hours
2.5 hours (when powering gimbal, camera and accessories at the same time)
Operating Temperature-4°F ~ 122°F (-20°C ~ 50°C)
WeightIncluding handle bar: 14 lb (6.4 kg)
Excluding handle bar: 11 lb (5.0 kg)
Gimbal DimensionsExcluding handle bar: 350 mm (W) x 416 mm (D) x 530 mm (H)
Including handle bar: 630 mm (W) x 416 mm (D) x 720 mm (H)
Camera Tray DimensionsMaximum depth from the center of gravity on camera base plate: 245 mm
Maximum height measured from top of the camera base plate: 165 mm
Maximum width: 180 mm
Accessory Power Connections14.4 V x 4 Camera Cage (Combined 8 A), 14.4 V x 2 Pan Motor (Combined 4 A), 14 V x2 P-Tap (8 A)
GCU Input PowerIntelligent Battery: 4280 mAh-22.8 V
Connections2.4 GHz/5.8 GHz Remote Control, Bluetooth 4.0, USB Type-C
PC Assistant Software RequirementsWindows 7 or above; Mac OS X 10.11 or above
Mobile Assistant Software RequirementsiOS 9 or above; Android 4.4 or above
Load Weight (Reference Value)30 lbs (13.6 kg)
Angular Vibration Range± 0.02°
Maximum Controlled Rotation SpeedPan axis: 360°/s
Tilt axis: 360°/s
Roll axis: 360°/s
Mechanical Endpoint RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±220°
Controlled Rotation RangePan axis control: 360° continuous rotation
Tilt axis control: ±135°
Roll axis control: ±30°

Click here for more information.